San Diego — August 30 to September 13, 2022. A head gasket on the Prius, done on the ground, plus a homemade rig for cleaning the injectors while the engine was open.
Two weeks of evenings. The teardown went faster than expected and the reassembly took twice as long, which is the usual ratio. Every fastener came out into a labelled egg carton, because the alternative is guessing.
Teardown
August 30, 11:47 a.m. Engine bay still intact — the last photo before anything came apart.
Intake manifold off, working down toward the head.
Valve cover off. Camshafts and buckets, swimming in oil.
Late that night — head still bolted down, coolant staining everywhere.
Cam lobes up close.
Just past midnight. Head off, block open.
The reason for all of it: coolant burned across the tops of the pistons.
Parts laid out — 14:58.
The Gasket
The old gasket, out on the concrete.
Corrosion and debris in a coolant passage.
The head off the car, valvetrain laid out on a box.
Combustion chambers cleaned up, valves still seated.
New gasket on the deck. The blue is how you know it is the new one.
Injectors · The Custom Tool
Carburetor cleaner, a length of tube, and a cone to seal against the injector inlet.
The cone up close. Press fit, nothing to buy.
The whole rig: solvent in one end, alligator clips on the injector coil. Touch the clips to twelve volts and it fires — you can watch the spray pattern clean itself up.
Back Together
Every bolt labelled and parked in an egg carton. Reassembly is only as good as your notes.
Three weeks later, parked at 5,400 feet in Idyllwild. Still running.